2001 Okuma IMPACT LU15 BigBore Twin Turret CNC Turning Center OSP U110L w/Chuck
2001 Okuma IMPACT LU15 BigBore Twin Turret CNC Turning Center OSP U110L w/Chuck
$14,500 (USD)
Available quantity:1
Description
2001 Okuma IMPACT LU-15 Twin Turret CNC Turning Center Big Bore CNC Turning Center Machine Does Not Have Live Tooling Programmable Tow Along Tailstock w/Live Center Manual Touch Setter OSP U110L Controller Factory Equipped with 10'' Kitagawa Hydraulic Chuck Bison Set-Thru 10'' Power Chuck Included 3'' Thru Hole S/N: 2102 (NEW IN 2000-2001) Catalogue Specifications Machine Weight 11,000 lbs.
Max Diameter Bar Capacity: 2″
Max Swing Over Bed / Carriage: 20.87″ / 14.96″
Max Turning Diameter: 14.17″
Rapid Traverse Rates: (X / Z)591 / 787 IPM
Spindle Nose: A2-6
Spindle Speed: 45 – 4500 RPM
Tailstock Taper: MT#4
Tools: (Upper / Lower Turret)12 / 8
Turret Index: (Single Step)0.2 Seconds
X-Axis Travel: (Upper / Lower)10.23″ / 5.51″
Z-Axis Travel: (Upper / Lower)25.2″ / 24.21″
Machine 127” L x 81”W x 80“Tall EQUIPPED WITH: Side Discharge Chip Conveyor Approximate Overall Dimensions: 130" L-R x 85" F-B x 84" H Approximate Weight: 10,560 lbs
Specifications
Manufacturer | Okuma |
Model | LU-15 |
Condition | Used |
Serial Number | 2102 |
Seller notes | “USED - IN GOOD CONDITION. UNIT WAS REMOVED FROM ROLLS ROYCE AEROSPACE FACILITY. ONLY REASON WE ... Read moreabout the seller notes“USED - IN GOOD CONDITION. UNIT WAS REMOVED FROM ROLLS ROYCE AEROSPACE FACILITY. ONLY REASON WE ACQUIRED IS THAT WHOLE PLANT RETROFIT / UPGRADE... EVEN THE BENCH GRINDERS. 4th of 4 MACHINES WE TOOK OUT OF R-R. EVERYONE SATISFIED SO FAR!!! Unit has been in cold storage for a few years” Read Lessabout the seller notes |
Phase | Three |
Machine type | Swiss Screw Machine/CNC Turning Center |
Power source | Electric |
Custom bundle | No |
Modified item | No |
Swing over bed | 20.87'' |
Chuck size | 10 in |
Model year | 1994 |
Control | CNC |
Max spindle speed (rpm) | 3501 - 4000 |
Z-axis | 25.2'' |